Massey Ferguson MF1840
Massey Ferguson is a worldwide brand of AGCO CorporationCentre-Line Small Rectangular Baler
The MF SB 1840 small rectangular baler employs a ‘centre-line’ design in which the crop flows through the machine in a straight line – working like a mini large square baler, improving efficiency because the crop is not turned before entering the chamber.
Key features are retained from its predecessor , such as narrow transport width, 1.9m wide pick-up with standard gauge wheels, short stroke and high speed.
- Central Knotter Greasing Kit
- Crop Flow
- Gauge Wheels
- Optiform Bale Chamber
- Pick-up
- Pre-formed Slice Concept
Bale Size |
MF 1840 |
|---|---|
| Cross section (width x height) | 457 x 356 mm |
| Bale length (maximum) | Up to 1300 mm |
Dimensions and Weights |
|
| Overall width | 2600 mm |
| Transport width | 2600 mm |
| Overall length - less bale chute | 4760 mm |
| Overall length - with bale chute | 5660 mm |
| Overall height | 1700 mm |
| Weight (approx.) | 1570 kg |
Main Drive System |
|
| Protection | Slip clutch, overrunning clutch and flywheel shear bolt |
Pick-up |
|
| Lift/lower | Hydraulic |
| Panel to panel - outside | 2264 mm |
| Effective working width | 1928 mm |
| Width - outside tine to outside tine | 1782 mm |
| Number of tine bars | 4 |
| Number of double tines | 56 |
| Drive protection | Torque limiter |
| Auger diameter | 280 mm |
Feeding System |
|
| Packer | 4 tine fork |
| Protection | Slip clutch, overrunning clutch and flywheel shear bolt |
Plunger |
|
| Speed | 100 strokes/min |
| Length of stroke | 550 mm |
| Number of plunger roller bearings | 8 |
Tying Mechanism |
|
| Number / type of knotters | Two heavy duty single knotters |
| Twine type | High quality plastic |
| Capacity | 10 spools |
Tyres |
|
| Standard | 31 x 13.5 - 15, 8-Ply |
| Lights | CE road lighting |
Bale Density System |
|
| Standard | Spring loaded density control rails |
| Optional | Hydraulic density control |
Tractor Requirements |
|
| Recommended PTO horsepower | 50 hp / 37 kW |
| PTO operating speed | 540 rev/min |
| PTO type | Type 1 1 3/8" 6 spline CV PTO shaft |
| Hydraulics spool valve requirement | 1 x Double Acting |
Variable Equipment |
|
| Automatic hydraulic bale density control | ◯ |
| Adjustable drawbar / wagon hitch | ◯ |
Recent Units
Browse through the vast selection of machineries that have recently been added to our inventory.
